• Cung Cấp, Cho Thuê Switch Cisco, Router Cisco, Wifi Cisco

Chi Tiết Sản Phẩm

  • : switch cisco 3650-48TS-S
  • : Giá Tham Khảo 45.000.000 VNĐ
  • : SWITCH - ROUTER
  • : 12 Tháng
  • : 0932 783 869

Mô Tả

Product Overview

     Integrated wireless controller capability with:

     Up to 40G of wireless capacity per switch (48-port models)

     Support for up to 50 access points and 1000 wireless clients on each switching entity (switch or stack)

   24 and 48 10/100/1000 data and PoE+ models with energy-efficient Ethernet (EEE) supported ports

   24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit) Cisco UPOE and PoE+ models with EEE[1]

   Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit Ethernet, four 10 Gigabit Ethernet, eight 10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small Form-Factor Pluggable Plus (QSFP+) ports

   24-port and 48-port 10/100/1000 PoE+ models with lower noise and reduced depth of 11.62 inches for shallow depth cabinets in enterprise, retail, and branch-office environments

   Optional Cisco StackWise-160 technology that provides scalability and resiliency with 160 Gbps of stack throughput

   Dual redundant, modular power supplies and three modular fans providing redundancy[2]

   Support for external power system RPS 2300 on the 3650 mini SKUs for power redundancy

   Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit (RU) form factor

   Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor

   IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with existing Category 5e and Category 6

   IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a better AV experience, including improved time synchronization and quality of service (QoS)

   Software support for IPv4 and IPv6 routing, multicast routing, modular QoS, Flexible NetFlow (FNF) Version 9, and enhanced security features

   Single universal Cisco IOS® Software image across all license levels, providing an easy upgrade path for software features

   Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support

Switch Models and Configurations

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports and ship with one power supply. Tables 1 through 5 provide further details. Figure 1 is an image of the Cisco Catalyst 3650 Series Switches.

data_sheet-c78-729449_0.jpg

Figure 1.         

Cisco Catalyst 3650 Series Switches

Table 1 shows the Cisco Catalyst 3650 Series configurations.

Table 1.          Cisco Catalyst 3650 Series Configurations

Models

Fixed Uplinks

Total 10/100/1000 Ethernet Ports

Default AC Power Supply

Available PoE Power

WS-C3650-24TS

4 x Gigabit Ethernet with Small Form‑Factor Pluggable (SFP)

24

250 WAC

-

WS-C3650-48TS

48

WS-C3650-24PS

24 PoE+

640 WAC

390 W

WS-C3650-48PS

48 PoE+

WS-C3650-48FS

48 PoE+

1025 WAC

775 W

WS-C3650-24TD

2 x 10 Gigabit Ethernet with SFP+ and 2 x 1 Gigabit Ethernet with SFP

24

250 WAC

 

WS-C3650-48TD

48

 

 

WS-C3650-24PD

24 PoE+

640 WAC

390 W

WS-C3650-24PDM

24 PoE+

Fixed 640 WAC

390 W

WS-C3650-48PD

48 PoE+

640 WAC

390 W

WS-C3650-48FD

48 PoE+

1025 WAC

775 W

WS-C3650-8X24PD

 

24 PoE+ (with 8 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)

715 WAC

435 W

WS-C3650-12X48FD

 

48 PoE+ (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)

1100 WAC

660 W

WS-C3650-48TQ

4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP

48

250 WAC

 

WS-C3650-48PQ

48 PoE+

640 WAC

390 W

WS-C3650-48FQ

48 PoE+

1025 WAC

775 W

WS-C3650-48FQM

48 PoE+

Fixed 975 WAC

775 W

WS-C3650-8X24UQ

24 UPOE (with 8 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)

1100 WAC

820 W

WS-C3650-12X48UQ

48 UPOE (with 12 100-Mbps and 1‑, 2.5-, 5-, and 10-Gbps ports)

1100 WAC

660 W

WS-C3650-12X48UR

8 x 10 Gigabit Ethernet with SFP+ or 8 x Gigabit Ethernet with SFP

48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)

1100 WAC

660 W

WS-C3650-12X48UZ

2 x 40 Gigabit Ethernet with QSFP+

48 UPOE (with 12 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps ports)

1100 WAC

660 W

Fixed Uplinks

All Cisco Catalyst 3650 Series Switches have fixed, built-in uplink ports. Customers can choose from five types of uplink ports at the time of the switch purchase:

   Four Gigabit Ethernet with Small Form-Factor Pluggable (SFP)

   Two 10 Gigabit Ethernet with SFP+ and two 10 Gigabit Ethernet with SFP or four Gigabit Ethernet with SFP

   Four 10 Gigabit Ethernet with SFP+ or four Gigabit Ethernet with SFP

   Eight 10 Gigabit Ethernet with SFP+ or eight Gigabit Ethernet with SFP

   Two 40 Gigabit Ethernet with QSFP+

The SFP+ interface supports both 10 Gigabit Ethernet and Gigabit Ethernet ports. Refer to Table 1 for a description of the basic switch models and the corresponding uplink ports. Refer to Table 2 for a description of the various uplink port interface options.

Table 2.          1 and 10 Gigabit Fixed Uplink Configurations

 

Interface Options

Fixed Uplink Ports

10 Gigabit Ethernet SFP+ Ports

Gigabit Ethernet SFP Ports

4 x Gigabit Ethernet fixed uplink ports

0

4

4 x Gigabit Ethernet or 2 x 10 and 2 x 1 Gigabit Ethernet fixed uplink ports

2

0

0

4

2

2

4 x Gigabit Ethernet and 4 x 10 Gigabit Ethernet fixed uplink ports

4

0

0

4

2

2

3

1

1

3

8 x Gigabit Ethernet or 8 x 10 Gigabit Ethernet fixed uplink ports

8

0

0

8

Any combination of 10 Gigabit Ethernet and remaining 1 Gigabit Ethernet uplink ports

Dual Redundant Modular Power Supplies and External RPS2300

The Cisco Catalyst 3650 Series Switches support dual redundant power supplies (see Figure 2). The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in power supply bay 1. The switch also ships with three field-replaceable fans.

data_sheet-c78-729449_1.jpg

Figure 2.         

Redundant Power Supplies

Table 3 shows the different power supplies available in these switches and available PoE power.

Table 3.          Switch Models and Corresponding Default Power Supplies

Models

Default Power Supply

Available PoE Power

Support Secondary Power Supply

24-port data switch

PWR-C2-250WAC

-

Yes

48-port data switch

Yes

24-port PoE switch

PWR-C2-640WAC

390 W

Yes

48-port PoE switch

Yes

48-port full PoE switch

PWR-C2-1025WAC

775 W

Yes

24-port mini PoE switch

Fixed 640 WAC

390W

No, but supports RPS 2300

48-port mini PoE switch

Fixed 975 WAC

775W

No, but supports RPS 2300

24-port Multigigabit PoE switch

PWR-C1-715WAC

435 W

Yes

24-port Multigigabit UPOE switch

PWR-C1-1100WAC

820 W

Yes

48-port Multigigabit full PoE switch

 

 

48-port Multigigabit UPOE switch

660 W

Yes

The multigigabit switches support a different set of power supplies than the non-multigigabit switches. In addition the PWR-C1-350WAC is not supported on the multigigabit switches. In addition to the power supplies listed in Table 3, a 640W DC power supply is available at the time of order or as a spare on all non-multigigabit switch models. The DC power supply also delivers PoE capabilities for maximum flexibility (refer to Table 4 for available PoE budget with DC power supplies). Customers can mix and match the AC and DC power supplies in the two available power supply slots. Any of these power supplies can be installed in any of the switches.

Table 4.          Available PoE with DC Power Supply

Model

Number of DC Power Supplies

Total Available PoE Budget

24-port or 48-port PoE Switch (non-multigigabit)

1

390 W

2

780 W

24-port PoE Switch (Multigigabit)

1

160 W

2

600 W

48-port PoE Switch (Multigigabit)

1

0 W

2

440 W

Power over Ethernet Plus (PoE+)

The Cisco Catalyst 3650 Series Switches support both PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at standard), which provide up to 30 W of power per port. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. The 3650 Series can provide a lower TCO for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant end device. Table 5 shows the power supply combinations required for different PoE needs.

Table 5.          Minimum Power Supply Requirements for Full PoE and PoE+

 

24-Port PoE Switch

48-Port PoE Switch

PoE on All Ports
(15.4 W per port)

One PWR-C2-640 WAC

One PWR-C2-1025WAC or Two PWR-C2-640 WAC

PoE+ on All Ports
(30 W per port)

One PWR-C2-1025WAC or Two PWR-C2-640 WAC

Two PWR-C2-1025 WAC

Cisco Universal Power over Ethernet (Cisco UPOE)

Cisco UPOE is a breakthrough technology, offering the following services and benefits:

   60W per port to enable a variety of end devices such as Samsung VDI client, BT IP turret systems in trading floors, Cisco Catalyst compact switches in retail and hospitality environments, personal Cisco TelePresence® systems, and physical access control devices

   High availability for power and guaranteed uninterrupted services, a requirement for critical
applications (e911)

   Lower OpEx by providing network resiliency at lower cost by consolidating backup power into
the wiring closet

   Faster deployment of new campus access networking infrastructures by eliminating the need for a power outlet for every endpoint

The Cisco UPOE capability is available only on select multigigabit models.

Table 6 shows the power supply requirements for Cisco UPOE.

Table 6.          Power Supply Requirements for Cisco UPOE

 

24-Port Multigigabit Cisco UPOE Switch

48-Port Multigigabit Cisco UPOE Switch

Cisco UPOE (60W per port) on all
(24-port switch) or max. 29 ports
(48-port switch)

One 1100W and one 715W power supplies or two 1100W power supplies

Two 1100W power supplies

Cisco Catalyst Multigigabit Technology

Cisco Multigigabit Ethernet is a unique innovation to the new Cisco Catalyst Ethernet access switches. With the enormous growth of 802.11ac and new wireless applications, wireless devices are promoting the demand for more network bandwidth. This creates a need for a technology that supports speeds higher than 1 Gbps on all cabling infrastructure. Cisco multigigabit technology allows you to achieve bandwidth speeds from 1 Gbps through 10 Gbps over traditional Category 5e (Cat 5e) cabling or above. In addition, the multigigabit ports on select Cisco Catalyst switches support Cisco UPOE, which is increasingly important for next-generation workspaces and Internet of Things (IoT) ecosystems.

Cisco multigigabit technology offers significant benefits for a diverse range of speeds, cable types, and PoE power. The benefits can be grouped into three different areas:

   Multiple speeds: Cisco Catalyst Multigigabit Technology supports autonegotiation of multiple speeds on switch ports. The supported speeds are 100 Mbps, 1 Gbps, 2.5 Gbps, and 5 Gbps on Cat 5e cable and up to 10 Gbps over Cat 6a cabling

   Cable type: The technology supports a wide range of cable types, including Cat 5e, Cat 6, and Cat 6a or above

   PoE power: The technology supports PoE, PoE+, and Cisco UPOE for all the supported speeds and cable types

Cisco Catalyst 3650 Mini Switches

The Cisco Catalyst 3650 Series adds new mini switches to the existing 3650 family of switches. These switches are less than 12” deep and quieter than the existing 3650 switches, making them perfect to deploy in tight wiring cabinets, racks, or user spaces where depth of the switch is a concern. You can avoid replacing the cabinets or mounting the switch at an angle and as a result reduce downtime to the network. These switches enable the same uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency as the existing 3650 switches. They come in 24- and 48-port 10M/100M/1000M switch SKUs (WS-C3650-24PDM and WS-C3650-48FQM) and support all the same features as the existing 3650 switches except that they come with fixed fans, fixed power supplies, and support for external RPS2300 for redundancy. These PoE switches support both PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at standard), providing up to 30W of power for 12 ports for a total of 390W on the 24-port model and up to 30W of power for 24 ports for a total of 775W on the 48-port model. The 24-port switch has 2x1 Gigabit Ethernet SFP and 2x10 Gigabit Ethernet SFP+ uplinks; the 48-port switch has 4x10 Gigabit Ethernet SFP+ uplinks to support any high-bandwidth application. These switches support stacking and can stack with each other or the existing 3650 switches using the same Cisco StackWise-160 technology. The 3650 mini and 3650 use the same software and thus can be deployed and managed using the same policies, configuration, and so on as the existing 3650 switches. Some use cases for the 3650 mini are the following:

Small Offices and Branches

Many small branches and satellite offices where there are few employees do not have larger wiring closets because of space constraints. A typical office like this has smaller cabinets and would need a switch that can serve few employees, provide PoE support, can manage wired-wireless networks, and applies the same consistent policies as a bigger branch or office. Because of its less than 12” depth, lower noise, and support for 10G uplinks along with stacking, advanced security, and wired-wireless convergence, the 3650 mini is the perfect switch for this type of space.

Education

The 3650 mini switch extends access to labs, classrooms, and other training rooms from the central/floor distribution rooms, reducing cost of cabling and providing superior quality of service with enhanced security, wired-wireless convergence, and enterprise network features. Because of its shallow depth and lower noise, these switches are ideally suited for classrooms or confined areas.

Retail

A typical retail outlet needs to serve customers at multiple sales points, each with a POS machine, access points, phone, printer, video display with network, and some PoE powering. These retail outlets connect to the access router that connects them to the outside network and typically need switches that fit in shallow depth cabinets. Because of the 12” depth of these switches along with advanced security and networking features, they can help retailers efficiently utilize space and save on real estate cost.

Benefits



Sản Phẩm Tương Tự

Sản Phẩm Đã Xem

0932 783 869